High-Performance S11 Oil Immersed Transformer from China Suppliers | Fully Sealed Structure Factory
Our company's products use Dyn11 in the connection group, which can significantly reduce the adverse effects of harmonics on the power grid and improve the quality of power supply.
Eliminates the oil storage tank and automatically adjusts the oil volume change through the elasticity of the corrugated oil tank's corrugated sheet. This isolates the transformer from air, effectively preventing oil degradation and insulation aging, extending its service life with no need to hang the core or repair during normal operation.
Features an excellent short-circuit resistance design, utilizing low axial short-circuit force structure coils and a high reliability support structure body, greatly improving the ability to withstand accidental short circuits.
| Rated Capacity (kVA) |
Voltage Combination (kV) |
Connection Symbol | Loss (kW) |
No-load Current (%) |
Short-circuit Impedance (%) |
Weight (kg) |
External dimensions (mm) L*B*H |
Track gauge (mm) |
||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| High Voltage | Low Voltage | No-load | Load | Equipment Weight | Oil Weight | Total Weight | ||||||
| 200 | 10.5 10 6.3 6 |
6.3 3.1 5 3 |
Yd11 Dy11 |
0.34 | 3.15 | 1.8 | 4.5 | 650 | 160 | 1000 | 1180×740×1270 | 660/660 |
| 250 | 0.40 | 3.6 | 1.7 | 770 | 200 | 1190 | 1230×800×1340 | |||||
| 315 | 0.48 | 4.3 | 1.6 | 900 | 215 | 1300 | 1320×810×1370 | |||||
| 400 | 0.57 | 5.2 | 1.5 | 1080 | 260 | 1650 | 1380×900×1390 | |||||
| 500 | 0.68 | 6.2 | 1.4 | 1250 | 280 | 1890 | 1400×920×1450 | |||||
| 630 | 0.82 | 6.92 | 0.6 | 5.5 | 1470 | 340 | 2245 | 1580×1020×1430 | 820/820 | |||
| 800 | 1.00 | 8.96 | 0.6 | 1735 | 385 | 2685 | 1665×1070×1520 | |||||
| 1000 | 1.18 | 9.91 | 0.6 | 1910 | 430 | 2940 | 1740×1160×1550 | |||||
| 1250 | 1.40 | 11.7 | 0.5 | 2210 | 590 | 3640 | 1820×1210×1740 | |||||
| 1600 | 1.68 | 14.1 | 0.4 | 2640 | 680 | 4270 | 1940×1240×1860 | |||||
| 2000 | 2.01 | 16.9 | 0.4 | 2890 | 725 | 4775 | 2210×1920×1970 | |||||
| 2500 | 2.37 | 19.6 | 0.4 | 3460 | 910 | 5710 | 2260×1970×1995 | 1070/1070 | ||||
| 3150 | 2.80 | 23.3 | 0.4 | 4230 | 1350 | 7085 | 2320×2280×2360 | |||||
| 4000 | 10.5 | 6.3 3.1 5 |
3.45 | 27.3 | 0.4 | 5025 | 1675 | 8150 | 2640×2480×2475 | |||
| 5000 | 4.10 | 31.3 | 0.4 | 6020 | 1940 | 9610 | 2575×2640×2590 | |||||
| 6300 | 4.89 | 35 | 0.4 | 8125 | 2550 | 12660 | 2640×2820×2810 | |||||
| 8000 | 6.52 | 40.5 | 0 | 9620 | 2780 | 15100 | 2710×2840×3040 | 1475/1475 | ||||
| 10000 | 7.70 | 47.70 | 0.55 | 11660 | 3070 | 17480 | 2850×2880×3265 | |||||
Note: ① High voltage tap range: * 5% or * 2 * 2.5%; Frequency 50Hz
The provided external dimensions are for reference only during selection, and the final dimensions are subject to the product's external drawing.
- Altitude: not exceeding 1000m;
- Environmental temperature: maximum temperature +40 ℃;
- The average temperature of the hottest month is +30 ℃;
- The highest annual average temperature is +20 ℃;
- The minimum outdoor temperature is -25 ℃.
- The waveform of the power supply voltage is approximately a sine wave;
- For three-phase transformers, the three-phase power supply voltage should be roughly symmetrical;
- Installation environment: There is no obvious pollution in the installation environment;
- Ground acceleration caused by earthquakes: horizontal direction less than 3m/s², vertical direction less than 1.5m/s².
Any special usage conditions beyond the normal usage conditions of the transformer should be specified during the inquiry and ordering process.
The transformer products produced by our company meet the latest version of the above standards.
When placing an order, the product model, rated capacity, high and low voltage ratings, high voltage division range, number of phases, frequency, and connection group number should be provided.
