Leave Your Message
Products Categories
Featured Products

Pre installed Substation (American Style) Complete pre installed product and fully sealed structure

ZGS □ -12 prefabricated substation is a domestically produced American style box transformer produced by our company. As an important power supply unit in cable based distribution networks, this product is a complete set of pre installed products that integrates high-voltage control, protection, substation, and distribution equipment. It is widely used in urban and rural distribution networks.

    Overview

    ZGS □ -12 prefabricated substation is a domestically produced American style box transformer produced by our company. As an important power supply unit in cable based distribution networks, this product is a complete set of pre installed products that integrates high-voltage control, protection, substation, and distribution equipment. It is widely used in urban and rural distribution networks.

    This product places high-voltage load switches and high-voltage fuses in transformer oil, and has two structural forms: sharing or splitting with the transformer body. The fuel tank adopts a fully sealed structure and is equipped with an oil temperature gauge, an oil level gauge, and a pressure gauge. Pressure relief valves, oil release valves, and other components are used to monitor the operation of transformers. This product is divided into ring network type, terminal type, and dual power supply type. In order to make this product more suitable for the actual requirements of China's power grid, the company has also launched plug-in dry-type fuses, whose melting does not affect the performance of transformer oil. According to the complexity of low-voltage feed out requirements, ZGS-12 products are divided into three types of shell forms: standard, reinforced, and comprehensive, allowing users and design units to achieve more flexibility and economy in selection.

    Model and Meaning

    1.1.Pre installed Substation (American Style) Complete pre installed product  and  fully  sealed  structure.png

    Environmental Conditions for Use

    1.Environmental temperature:  -30 ° C to 40 ° C

    2.Altitude: ≤ 4000m;

    3.Wind speed: equivalent to 34m/s (not greater than 700Pa);

    4.Humidity: The average daily relative humidity should not exceed 95%; 5.The monthly relative humidity value shall not exceed 95%;

    6.Installation environment: The surrounding air is not significantly polluted by corrosive or flammable gases, and there is no severe vibration at the installation site;

    7.When ordering this product beyond the above conditions, you can negotiate with our company.

    Product Structure Features

    Compact structure and small volume, only about 1/3 to 1.5 of the capacity of domestic European box transformers, greatly reducing the footprint.

    Fully sealed and insulated structure, no insulation distance required, reliable protection of personal safety.

    High voltage wiring can be used for both ring networks and terminals, with flexible power supply methods and high reliability.

    Excellent transformer performance: low loss, low noise, low temperature rise; Strong overload capacity, short circuit resistance, and strong impact resistance.

    Meet various low-voltage feed out requirements, can be selected according to the plan, or can be designed by oneself;

    There are two types of cable heads: 200A elbow type plug, 600A "T" type fixed cable joint, both of which can be equipped with fully insulated zinc oxide lightning arrester. The 200A cable head can be plugged and unplugged with load, and can also serve as an isolation switch.

    Technical Parameter

    Item

    Unit

    Technical Parameter

    Rated Voltage

    kV

    10/0.4 (High Voltage / Low Voltage)

    Maximum Operating Voltage

    kV

    12 (High Voltage Side)

    Rated Frequency

    Hz

    50

    Rated Capacity

    kVA

    150 - 1600

    1min Power Frequency Withstand Voltage

    kV

    35

    Lightning Impulse Voltage

    kV

    75

    Cooling Method

     

    Oil  immersed Self cooling

    Breaking Current of High - Voltage Backup Fuse

    kA

    50

    Breaking Current of Plug - in Fuse

    kA

    2.5

    Ambient Temperature

    °C

    - 35 ~ + 40

    Allowable Temperature Rise of Coil

    K

    65

    No - load Tap - changing

     

    ± 5% or ± 2×2.5%

    Noise Level

    db

    50

    Protection Class

     

    IP43

    Leave Your Message